Enter/Exit Programming Mode
Data Matrix Set Length 2
This feature specifies one of the bar code lengths for
trol on page
Mode, or the second fixed length if in Fixed Length Mode. Characters can be set
from 0001 to 3,116 characters in increments of 0001 (pad with zeroes).
See
page 250
$CDML2
Select Data Matrix Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
204
203. Length 2 is the maximum label length if in Variable Length
for detailed instructions on setting this feature.
Length 2 is 3,116 Characters
DEFAULT
Data Matrix Length Con-
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
CANCEL
Data Matrix
representing your
RIDA™ DBT6400