Led And Beeper Indicators; Power On Alert; Good Read: When To Indicate - Datalogic QuickScan I QD24 Series Product Reference Manual

Enter/Exit Programming Mode

LED AND BEEPER INDICATORS

Power On Alert

Disables or enables the indication (from the Beeper) that the reader is receiving power.
$CBPPU00(CR)
Power On Alert = Disable (No Audible Indication)
$CBPPU01(CR)
DEFAULT
Power On Alert = Power-up Beep

Good Read: When to Indicate

This feature specifies when the reader will provide indication (beep and/or flash its green LED) upon successfully
reading a bar code.
$CBPIN00(CR)
DEFAULT
Indicate Good Read = After Decode
$CBPIN01(CR)
Indicate Good Read = After Transmit
$CBPIN02(CR)
Indicate Good Read =
After CTS goes inactive then active
QuickScan™ I QD24XX
64