Bt Pin Code; Select Pin Code Length; Set Pin Code - Datalogic RIDA DBT6400 Product Reference Manual

Enter/Exit Programming Mode

BT PIN Code

After enabling Security Mode (see
you want to set a 4-digit or a 16-digit PIN Code.

Select PIN Code Length

$CBTPS00\r
Select 4-character BT PIN Code

Set PIN Code

Determine the desired characters for the PIN code, then convert to hexadecimal
the ASCII Chart on the inside back cover of this manual.
$CBTPC
Set 4-character BT PIN Code
~
CANCEL
264
DEFAULT
"BT Security Level" on page
~$CBTPS01\r
Select 16-character BT PIN Code
To configure this feature, scan the ENTER/EXIT PROGRAM-
MING MODE bar code above, then the bar code at left fol-
lowed by the digits from the Alphanumeric characters in
Appendix D, Keypad
ter(s). End by scanning the ENTER/EXIT bar code again.
$CBTP6
Set 16-character BT PIN Code
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
31323334 = Default PIN Code is 1234
262), specify whether
DEFAULT
representing your desired charac-
RIDA™ DBT6400
using