Maxicode Set Length 2 - Datalogic RIDA DBT6400 Product Reference Manual

Symbology Selection

Maxicode Set Length 2

This feature specifies one of the bar code lengths for
on page
or the second fixed length if in Fixed Length Mode. Characters can be set from
0001 to 0145 characters in increments of 0001 (pad with zeroes).
See page 250
$CMXL2
Select Maxicode Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
206. Length 2 is the maximum label length if in Variable Length Mode,
for detailed instructions on setting this feature.
Length 2 is 0145 Characters
DEFAULT
Enter/Exit Programming Mode
Maxicode Length Control
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
CANCEL
representing your
207