Abc Codabar Dynamic Concatenation Timeout; Abc Codabar Force Concatenation - Datalogic RIDA DBT6400 Product Reference Manual

1D Symbologies

ABC Codabar Dynamic Concatenation Timeout

This parameter specifies the timeout in 10-millisecond ticks used by the ABC
Codabar Dynamic Concatenation Mode. The timeout can be set within a range
of 05 to 255 in 10ms increments. A setting of zero specifies no delay.
Select ABC Codabar Dynamic Concatenation
Timeout Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.

ABC Codabar Force Concatenation

Forces labels starting or ending with D to be concatenated.
DEFAULT
$CCBFC01
ABC Codabar Force Concatenation = Enable
Product Reference Guide
$CCBDT
10 = Quiet Interval of 200 ms
DEFAULT

Enter/Exit Programming Mode
To configure this feature, scan the ENTER/EXIT bar
code above, then the bar code at left followed by digits
from the Alphanumeric characters in
Keypad
representing your desired character(s). End
by scanning the ENTER/EXIT bar code again.
CANCEL
$CCBFC00
ABC Codabar Force Concatenation = Disable
Appendix D,
~

161