Label Id; Label Id: Pre-Loaded Sets - Datalogic RIDA DBT6400 Product Reference Manual

Enter/Exit Programming Mode

Label ID

A Label ID is a customizable code of up to three ASCII characters (each can be
one of hex 0x01-0xFF), used to identify a bar code (symbology) type. It can be
appended previous to or following the transmitted bar code data depending
upon how this option is enabled. This feature provides options for configuring
custom Label IDs as a pre-loaded set (see
page 68) or individually per symbology (see
bology"
industry standard label identifier for ALL symbology types, see the previous
feature

Label ID: Pre-loaded Sets

The scanner supports two pre-loaded sets of Label IDs, the USA set and the EU
set. See
ing the pre-loaded sets that are provided.
CAUTION
DEFAULT
Label ID Pre-loaded Set = EU Set
68
on page 69). If you wish to program the scanner to always include an
"Global AIM ID" on page 67.

"Label ID: Pre-loaded Sets"

When changing from one Label ID set to another, all other scanner
configuration settings, including the host interface type, will be erased
and set to the factory defaults. Any custom configuration or custom
defaults will be lost.
$Ae
"Label ID: Pre-loaded Sets"
"Label ID: Set Individually Per Sym-
on page 238 for more information concern-
$AE
Label ID Pre-loaded Set = USA Set
Label ID
on
RIDA™ DBT6400