Pdf417 Set Length 2 - Datalogic RIDA DBT6400 Product Reference Manual

Enter/Exit Programming Mode

PDF417 Set Length 2

This feature specifies one of the bar code lengths for
page
the second fixed length if in Fixed Length Mode. Length includes the bar code's
check, data, and full-ASCII shift characters. The length does not include start/
stop characters. Characters can be set from 01 to 2,710 characters (pad with
zeroes) in increments of 01. Any value greater than 2,710 will be considered to
be 2,710.
See page 250
$CP4L2
Select PDF417 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
210
208. Length 2 is the maximum label length if in Variable Length Mode, or
for detailed instructions on setting this feature.
Length 2 is 2,710 Characters
DEFAULT
PDF417 Length Control on
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
CANCEL
PDF417
representing your
RIDA™ DBT6400