Code 128 Set Length 2 - Datalogic RIDA DBT6400 Product Reference Manual

Enter/Exit Programming Mode

Code 128 Set Length 2

This feature specifies one of the bar code lengths for
on page
page 138
Mode. Length includes the bar code's data characters only.
The length can be set from 1 to 80 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See
more detailed programming instructions.
Select Code 128 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
140
138. Length 2 is the maximum label length if in
Mode, or the second fixed length if in
$CC8L2
80 = Length 2 is 80 Characters
DEFAULT
Code 128 Length Control
Fixed Length on page 138
"Set Length 2"
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
pad
representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
CANCEL
Code 128
Variable Length on
on page 250 for
Appendix D, Key-
~
RIDA™ DBT6400