Base Station Interface Selection; Configuring The Interface - Datalogic RIDA DBT6400 Product Reference Manual

Setup

Base Station Interface Selection

Upon completing the physical connection between the base and its host, pro-
ceed directly to Interface Selection to select the kind of USB interface type the
base is connected to; scan the appropriate bar code for your system's interface
type.
The base will support the following USB host interfaces:
•
•
•
•
For defaults and additional information associated with each interface, proceed
to the corresponding chapter in the Product Reference Guide.

Configuring the Interface

Scan the programming bar code which selects the appropriate interface type for
the system the reader will be connected to.
NOTE
USB INTERFACES
a. Download the correct USB COM driver from www.datalogic.com.
12
USB COM to simulate RS-232 standard interface
USB-OEM (can be used for OPOS/UPOS/JavaPOS)
USB Keyboard
USB Composite (KEYBOARD + COM)
Unlike some other programming features and options, interface selections
require that you scan only one programming bar code label. DO NOT scan an
ENTER/EXIT bar code prior to scanning an interface selection bar code.
USB COM to simulate RS-232 standard interface
(can be used for OPOS/UPOS/JavaPOS)
a
Select USB-COM-STD
USB-OEM
Select USB-OEM
USB Keyboard
Select USB Keyboard
USB Composite
a
Select USB Composite
RIDA™ DBT6400