Enter/Exit Programming Mode
LED and Speaker Indicators
Power On Alert
Disables or enables the indication (from the Speaker) that the scanner is receiv-
ing power.
$CBPPU01
Power On Alert = Power-up Beep
Audio Jingles
The scanner can be set up to sound a predefined "Jingle" (a short, user-defined
tune uploaded via Datalogic Aladdin™ configuration software) or traditional
beep sounds to indicate good read and power-up events.
To upload a jingle in Aladdin:
1. Install Datalogic Aladdin™ (v 1.8.0.0.0 or later) on your computer.
2. Connect the scanner you want to program to the computer.
3. Use Device Autodetection to allow Aladdin to search for your reader, or
4. After the Configuration screen opens, click on the music icon in the menu
80
click on Offline Configuration to select the file for your device.
bar in the upper right-hand part of the screen:
LED and Speaker Indicators
$CBPPU00
Power On Alert = Disable (No Audible Indication)
DEFAULT
RIDA™ DBT6400