Enter/Exit Programming Mode
Aztec Code Set Length 2
This feature specifies one of the bar code lengths for
trol on page
Mode, or the second fixed length if in Fixed Length Mode. Characters can be set
from 0001 to 3,832 characters in increments of 0001 (pad with zeroes).
See
page 250
$CAZL2
Select Aztec Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
198
196. Length 2 is the maximum label length if in Variable Length
for detailed instructions on setting this feature.
Length 2 is 3,832 Characters
DEFAULT
Aztec Code Length Con-
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
CANCEL
Aztec Code
representing your
RIDA™ DBT6400