Qr Code Set Length 2 - Datalogic RIDA DBT6400 Product Reference Manual

Enter/Exit Programming Mode
QR Code
This feature specifies one of the bar code lengths for
on page
or the second fixed length if in Fixed Length Mode. Characters can be set from
0001 to 7,089 characters in increments of 0001 (pad with zeroes).
See page 250
$CQRL2
Select QR Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
216
Set Length 2
214. Length 2 is the maximum label length if in Variable Length Mode,
for detailed instructions on setting this feature.
Length 2 is 7,089 Characters
DEFAULT
QR Code Length Control
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
CANCEL
QR Code
representing your
RIDA™ DBT6400