Set Length 1 - Datalogic RIDA DBT6400 Product Reference Manual

Enter/Exit Programming Mode
China Sensible Code
Specifies one of the bar code lengths for
on page
or the first fixed length if in Fixed Length Mode. Characters can be set from
0001 to 7,827 characters in increments of 0001 (pad with zeroes).
See page 248
$CCSL1
Select China Sensible Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
200

Set Length 1

199. Length 1 is the minimum label length if in
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
China Sensible Code Length Control
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
CANCEL
China Sensible Code
Variable Length Mode,
representing your
RIDA™ DBT6400