Enable Character - Datalogic RIDA DBT6400 Product Reference Manual

Enter/Exit Programming Mode

Enable Character

Specifies the value of the RS-232 host command used to enable the scanner.
ASCII characters or any hex value from 0 to 0xFF can be selected. See
Character"
Select Enable Character Setting
32
on page 232 for more detailed programming instructions
Setting to previously defined characters such as XON, XOFF, or
host commands conflicts with normal operation of these char-
acters.
NOTE
$CR2EC
DEFAULT
0x45 = Enable Character is 'E'
Enable Character
"Enable
.
RIDA™ DBT6400