Select Audio Jingle For Good Read Event - Datalogic Heron HD3130 Product Reference Manual

Enter/Exit Programming Mode

Select Audio Jingle for Good Read Event

This parameter selects which preloaded Jingle to use in indicating a good read
event.
After uploading up to fifteen (15) Jingles to the scanner using the Datalogic
Aladdin
(1-15) will be sounded when the scanner performs a good read.
$CAUGR
Select Audio Jingle on Good Read
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
DEFAULT
68
"Audio Jingle Enable" on page 66 must be selected for this configuration
item to take effect.
NOTE
™
configuration utility, use this setting to designate which of the Jingles
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by two digits
from the Alphanumeric characters in
Keypad
representing the desired Jingle #. End by scan-
ning the ENTER/EXIT bar code again.
00 = Use built-in Good Read Jingle (Shutter.wav)
Audio Jingles
Appendix D,
~
CANCEL
Heron™ HD3130