Datalogic RIDA DBT6400 Product Reference Manual page 205

Symbology Selection
See page 248
$CAZL1
Select Aztec Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
CANCEL
representing your
197