Micro Qr Code Set Length 2 - Datalogic RIDA DBT6400 Product Reference Manual

Symbology Selection
Micro QR Code
This feature specifies one of the bar code lengths for
Control on page
Length Mode, or the second fixed length if in Fixed Length Mode. Characters
can be set from 0001 to 0035 characters in increments of 0001 (pad with
zeroes).
See page 250
$CMQL2
Select QR Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Set Length 2
217. Length 2 is the maximum label length if in Variable
for detailed instructions on setting this feature.
Length 2 is 0035 Characters
DEFAULT
Enter/Exit Programming Mode
Micro QR Code Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
CANCEL
representing your
219