Micro Qr Code Set Length 1 - Datalogic RIDA DBT6400 Product Reference Manual

Enter/Exit Programming Mode
Micro QR Code
Specifies one of the bar code lengths for
217. Length 1 is the minimum label length if in
first fixed length if in Fixed Length Mode. Characters can be set from 0001 to
0035 characters in increments of 0001 (pad with zeroes).
See page 248
$CMQL1
Select Micro QR Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
218
Set Length 1
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
Micro QR Code Length Control on page
Variable Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
CANCEL
Micro QR Code
Mode, or the
representing your
RIDA™ DBT6400