Enter/Exit Programming Mode
MSI Set Length 1
This feature specifies one of the bar code lengths for
page
179
Mode, or the first fixed length if in
includes the bar code's data characters only.
The length can be set from 01 to 50 characters. See
for more detailed programming instructions.
$CMSL1
Select MSI Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
180
179. Length 1 is the minimum label length if in
01 = Length 1 is 1 Character
DEFAULT
MSI Length Control on
Variable Length on page
Fixed Length on page 179
"Set Length 1"
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
pad
representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
CANCEL
MSI
Mode. Length
on page 248
Appendix D, Key-
~
RIDA™ DBT6400