Rf Address Stamping; Source Radio Address Transmission; Source Radio Address Delimiter Character - Datalogic RIDA DBT6400 Product Reference Manual

Wireless Features
These features allow configuration of source radio data inclusion.

Source Radio Address Transmission

Enables/disables the ability of source radio address information to be transmitted to
the host and, if so, at what position with respect to the label data.
DEFAULT
$CBTAS01(CR)
Source Radio Address Transmission = Prefix

Source Radio Address Delimiter Character

This option specifies the delimiter character to be placed between the label data and
radio address when address stamping is enabled.
Product Reference Guide

RF ADDRESS STAMPING

When included as a prefix, the source-radio ID is displayed after all
label formatting has been applied. The 6 byte hex address is sent as
12 ascii characters, i.e., an address of 00 06 66 00 1A ED will be sent as
(shown in hex): 30 30 30 36 36 36 30 30 31 41 45 44
This feature only applies if "Source Radio Address Transmis-
sion" on page 261 is enabled.
Enter/Exit Programming Mode
$CBTAS00(CR)
Source Radio Address Transmission = Do Not Include
261