Bc412 Set Length 2 - Datalogic RIDA DBT6400 Product Reference Manual

1D Symbologies

BC412 Set Length 2

This feature specifies one of the bar code lengths for
page
189 Mode, or the second fixed length if in
Length includes the bar code's check, data, and full-ASCII shift characters. The
length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See
more detailed programming instructions.
Select BC412 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
189. Length 2 is the maximum label length if in
$CBCL2
50 = Length 2 is 50 Characters
DEFAULT
Enter/Exit Programming Mode
BC412 Length Control on
Variable Length on page
Fixed Length on page 189
"Set Length 2"
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
pad
representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
CANCEL
Mode.
on page 250 for
Appendix D, Key-
~
191