Rgb Led Settings - Datalogic RIDA DBT6400 Product Reference Manual

Reading Parameters

RGB LED Settings

The following configuration items specify settings for the RGB (Red Green Blue)
LEDs, which are used to indicate Good Read and Body Illumination when Scan-
ner is in Idle mode.
To set the RGB LEDs to a desired color and brightness:
1. Install Datalogic Aladdin™ (v 1.12.0.0.0 or later) on your computer.
2. Connect the scanner you want to program to the computer.
3. Select Device Autodetection > Search on Connection and follow instruc-
4. After the Configuration screen opens, click on RGB Led Settings in the
WARNING
Product Reference Guide
tions to set up communication with the scanner.
Reading Parameters folder (Expert Mode) to open RGB dialog.
Depending on the setting of RGB LED configuration parameters, the oper-
ating time between the charges is reduced.
Enter/Exit Programming Mode
93