Datalogic RIDA DBT6400 Product Reference Manual page 28

Enter/Exit Programming Mode
To program features:
1. Scan the ENTER/EXIT PROGRAMMING bar code, available at the top of each
2. Scan the bar code to set the desired programming feature. You may need
3. If additional input parameters are needed, go to
4. Complete the programming sequence by scanning the ENTER/EXIT PRO-
For more detailed descriptions, programming information and examples for
setting selected configuration items, see
20
programming page, when applicable.
to cover unused bar codes on the page, and possibly the facing page, to
ensure that the scanner reads only the bar code you intend to scan.
scan the appropriate characters from the keypad.
Additional information about many features can be found in the "Ref-
erences" chapter.
If you make a mistake before the last character, scan the CANCEL bar
NOTE
code to abort and not save the entry string. You can then start again at
the beginning.
GRAMMING bar code to exit Programming Mode.
Appendix D,
References, starting on page
Keypad, and
235.
RIDA™ DBT6400