Code 93 Set Length 1 - Datalogic RIDA DBT6400 Product Reference Manual

1D Symbologies

Code 93 Set Length 1

This feature specifies one of the bar code lengths for
on page
page 184
Length includes the bar code's data characters only.
The length can be set from 01 to 50 characters. See
for more detailed programming instructions.
Select Code 93 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
184. Length 1 is the minimum label length if in
Mode, or the first fixed length if in
$CC9L1
01 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
Code 93 Length Control
Fixed Length on page 184
"Set Length 1"
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
pad
representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
CANCEL
Variable Length on
Mode.
on page 248
Appendix D, Key-
~
185