Docking Beep; Leash Alarm - Datalogic RIDA DBT6400 Product Reference Manual

Wireless Features

Docking Beep

Enables/disables a beep indication when the handheld is placed in the Base Station.
$CBTCB01(CR)
Docking Beep = Enable

Leash Alarm

This setting specifies the number of seconds to sound the Leash Mode beeps (three
per second) when the handheld goes out of range. This is especially useful in instances
where the reader might inadvertently have been placed in a bag or cart.
For this mode to be effective, the reader must be linked to the Base Station or to the
Host. If the reader is asleep or disconnected from the Base Station, there is no way for
it to know where it is relative to the Base Station because communication is not active
between the devices.
DEFAULT
$CBTLB01(CR)
Leash Alarm = 1 Second
Product Reference Guide
Enter/Exit Programming Mode
$CBTCB00(CR)
Docking Beep = Disable
DEFAULT
$CBTLB00(CR)
Leash Alarm = Disabled
$CBTLB02(CR)
Leash Alarm = 2 Seconds
255