Micro Pdf417 Set Length 2 - Datalogic RIDA DBT6400 Product Reference Manual

Symbology Selection

Micro PDF417 Set Length 2

This feature specifies one of the bar code lengths for
Control on page
Length Mode, or the second fixed length if in Fixed Length includes the bar
code's data characters only. Characters can be set from 0001 to 0366 charac-
ters (pad with zeroes) in increments of 01. Any value greater than 0366 will be
considered to be 0366.
See page 250
$CMIL2
Select Micro PDF417 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
212. Length 2 is the maximum label length if in Variable
for detailed instructions on setting this feature.
Length 2 is 0366 Characters
DEFAULT
Enter/Exit Programming Mode
Micro PDF417 Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
CANCEL
representing your
213