Reading Parameters
RGB Good Read Holding Time
Specifies how long the RGB good read will stay in Brightness state. See
Good Read Holding Time"
Set RGB Good Read Holding Time
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
on page 244 for more information.
$CRBHT
14 = 2 seconds Holding Time
DEFAULT
Enter/Exit Programming Mode
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
representing your desired character(s). End by scanning
the ENTER/EXIT bar code again.
CANCEL
"RGB
Appendix D, Keypad
~
99