Disable All Symbologies; Coupon Control - Datalogic RIDA DBT6400 Product Reference Manual

Enter/Exit Programming Mode

Disable All Symbologies

Scan this label to disable all symbologies.

Coupon Control

This feature is used to control the method of processing coupon labels.
Options are:
•
•
•
To set this feature:
1. Scan the Enter/Exit bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit bar code.
$CCPCL01
Coupon Control = Enable only UPC/EAN
106
Allow all — allow all coupon bar codes to be decoded
Enable only UPC/EAN — enables only UPC/EAN coupon decoding
Enable only GS1 DataBar — enables only GS1 DataBar coupon decoding
unused bar codes on this and the facing page to ensure that the scanner
sees only the bar code you intend to scan.

Disable All Symbologies
$AD 
Disable all symbologies
$CCPCL00 
Coupon Control = Allow all
DEFAULT
$CCPCL02 
Coupon Control = Enable only GS1 DataBar
RIDA™ DBT6400