Programming Mode - Datalogic RIDA DBT6400 Product Reference Manual

Technical Specifications

Programming Mode

The following indications ONLY occur when the reader is in Programming Mode.
INDICATION DESCRIPTION
Label Program-
A valid programming label has
ming Mode
been scanned.
Entry
Label Program-
ming Mode
A label has been rejected.
Rejection of
Label
In cases where multiple labels
Label Program-
must be scanned to program
ming Mode
one feature, this indication
Acceptance of
acknowledges each portion as
Partial Label
it is successfully scanned.
Configuration option(s) have
Label Program-
been successfully pro-
ming Mode
grammed via labels and the
Acceptance of
reader has exited Program-
Programming
ming Mode.
Label Program-
ming Mode Can- Cancel label has been scanned.
cel Item Entry
276
LED
LED blinks continuously.
N/A
N/A
N/A
N/A
BEEPER
Reader sounds four low fre-
quency beeps.
Reader sounds three times at
lowest frequency and current
volume.
Reader sounds one short beep
at highest frequency and cur-
rent volume.
Reader sounds one high fre-
quency beep and 4 low fre-
quency beeps followed by
reset beeps.
Reader sounds two times at
low frequency and current vol-
ume.
RIDA™ DBT6400