Enter/Exit Programming Mode
Aztec Code
Aztec Code Enable / Disable
Enables/disables the ability of the reader to decode Aztec Code labels.
DEFAULT
$CAZEN01(CR)
Aztec Code = Enable
Aztec Code Length Control
This feature specifies either variable length decoding or fixed length decoding
for this symbology.
Variable Length:
may be set.
Fixed Length:
DEFAULT
$CAZLC01(CR)
Aztec Code Length Control = Fixed Length
Aztec Code Set Length 1
Specifies one of the bar code lengths for
196. Length 1 is the minimum label length if in
first fixed length if in Fixed Length Mode. Characters can be set from 0001 to
3,832 characters in increments of 0001 (pad with zeroes).
196
For variable length decoding, a minimum and maximum length
For fixed length decoding, two different lengths may be set.
$CAZEN00(CR)
Aztec Code = Disable
$CAZLC00(CR)
Aztec Code Length Control = Variable Length
Aztec Code Length Control on page
Variable Length
Aztec Code
Mode, or the
RIDA™ DBT6400