Keyboard Send Control Characters - Datalogic RIDA DBT6400 Product Reference Manual

Enter/Exit Programming Mode

Keyboard Send Control Characters

This feature specifies how the scanner transmits ASCII control characters to the
host. Reference
trol characters.
Options are as follows:
Send Ctrl+Key :
the format Ctrl+Key. Special keys are available in the range from 81H to A1.
Send Ctrl+Shift+Key :
in the format Ctrl+Shift+Keys.
Send Special Function Key :
the special function key mapping table (see
Mode or USB-Keyboard Alt Mode" on page
are not in the normal ASCII set. A unique set is provided for each available
scancode set.
DEFAULT
$CKBSC01
Keyboard Send Control Characters = Send Ctrl+Shift+Key
58
Appendix E, Scancode Tables
ASCII characters from 00H to 0x1FH inclusive are transmitted in
The behavior is the same as above, but control keys are sent
Send characters between 00H and 1FH according to

Keyboard Send Control Characters
for more information about con-
"Interface Type PC AT PS/2 Alt
300). This is used to send keys that
$CKBSC00
Keyboard Send Control Characters = Send Ctrl+Key
$CKBSC02
Keyboard Send Control Characters = Send Special Function
Key :


RIDA™ DBT6400