Bt Pin Code; Select Pin Code Length; Set Pin Code - Datalogic Gryphon I GBT4400 Product Reference Manual

Enter/Exit Programming Mode

BT PIN Code

After enabling Security Mode (see
to set a 4-digit or a 16-digit PIN Code.
setting this feature.

Select PIN Code Length

$CBTPC\r
Select 4-character BT PIN Code

Set PIN Code

Determine the desired characters for the PIN code, then convert to hexadecimal
ASCII Chart
examples for setting this feature.
$CBTPS00\r
Set 4-character BT PIN Code
~
CANCEL
246
on the inside back cover of this manual.
DEFAULT
"BT Security Mode" on page 245), specify whether you want
See page 287 for detailed information and examples for
$CBTP6\r
Select 16-character BT PIN Code
See page 287
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D. Keypad
characters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~$CBTPS01\r
Set 16-character BT PIN Code
Make a mistake? Scan the CANCEL bar code to
abort and not save the entry string. You can then
start again at the beginning.
31323334 = Default PIN Code is 1234
Gryphon™ I GD44XX/GBT4400/GM440X
BT Security Features
DEFAULT
using the
for detailed information and
representing your