Bt Pin Code; Select Pin Code Length; Set Pin Code - Datalogic Gryphon I GD44XX Product Reference Manual

Enter/Exit Programming Mode

BT PIN Code

After enabling Security Mode (see
whether you want to set a 4-digit or a 16-digit PIN Code.
detailed information and examples for setting this feature.

Select PIN Code Length

$CBTPS00\r
Select 4-character BT PIN Code

Set PIN Code

Determine the desired characters for the PIN code, then convert to hexadec-
imal
page 304
$CBTPC
Set 4-character BT PIN Code
~
CANCEL
260
using the ASCII Chart
for detailed information and examples for setting this feature.
DEFAULT
"BT Security Mode"
~$CBTPS01\r
Select 16-character BT PIN Code
on the inside back cover of this manual.
To configure this feature, scan the ENTER/EXIT PROGRAM-
MING MODE bar code above, then the bar code at left fol-
lowed by the digits from the Alphanumeric characters in
Appendix D, Keypad
ter(s). End by scanning the ENTER/EXIT bar code again.
$CBTP6
Set 16-character BT PIN Code
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
31323334 = Default PIN Code is 1234
Gryphon™ I GD44XX/GBT4400/GM440X
on page 259), specify
See page 304
DEFAULT
See
representing your desired charac-
for