Enter/Exit Programming Mode
BT PIN Code
After enabling Security Mode (see
set a 4-digit or a 16-digit PIN Code.
setting this feature.
Select PIN Code Length
$CBTPS00\r
Select 4-character BT PIN Code
Set PIN Code
Determine the desired characters for the PIN code, then convert to hexadecimal
Chart on page 1
on the inside back cover of this manual.
and examples for setting this feature.
$CBTPC
Set 4-character BT PIN Code
~
224
"BT Security Mode"
See
CANCEL
DEFAULT
on page
page 264
for detailed information and examples for
~$CBTPS01\r
Select 16-character BT PIN Code
See
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D Keypad
characters in
your desired character(s). End by scanning the ENTER/
EXIT bar code again.
$CBTP6
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
31323334 = Default PIN Code is 1234
QuickScan™ I QD24XX/QBT24XX/QM24XX
BT Security Features
223), specify whether you want to
DEFAULT
page 264
for detailed information
Set 16-character BT PIN Code
using the
ASCII
representing