Batch Features — cont.
Send Batch
Use this barcode to initiate sending of labels stored in batch memory.
Erase Batch Memory
Use this barcode to erase any labels stored in batch memory.
BT Security Features
These features enable/disable the BT system to require a configurable pin code to authen-
ticate/connect the BT devices, and encrypt the data.
BT Pin Code
This option specifies the 4-character pin code to be used for authentication of the BT
link.
code.
To set the pin code:
1. Determine the desired characters. For example, D254.
2.
Product Reference Guide
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction with
this barcode.
NOTE
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction with
this barcode.
NOTE
BT Security Mode on page 294
Convert the characters to hexidecimal using the
of this manual. In the case of the example, the hexidecimal equivalents would be:
D = 0x44, 2 = 0x32, 5 = 0x35, and 4 = 0x34
Send Batch
Erase Batch Memory
must be enabled in order to require the pin
ASCII Chart
BT Security Features
on the inside back
cover
291