Silent Mode; Rgb Good Read Enable - Datalogic QuickScan QD2590 Product Reference Manual

LED AND BEEPER INDICATORS

Silent Mode

If needed, audible indications can be disabled by scanning the labels below.
Please note that some important audible notifications are not muted in silent mode and
other notifications are replaced by vibration or visual indications.
All changes in audible notifications are summarized here:
•
•
•
•
SilentModeON

Silent Mode = Disable

RGB Good Read Enable

Specifies whether the RGB good read indicator is enabled or disabled.
$CRBGE00

RGB Good Read = Enable
Good Read beep is replaced with vibration
Power on beep is replaced with vibration
Error beep, chirp beeps are replaced with red top LED
Programming labels beeps are not muted
ENTER/EXIT PROGRAMMING MODE
Silent Mode = Enable
SilentModeOFF
RGB Good Read = Disable
$CRBGE01
PRODUCT REFERENCE GUIDE
91