HEIDENHAIN TNC 640 E Manuals

Manuals and User Guides for HEIDENHAIN TNC 640 E. We have 1 HEIDENHAIN TNC 640 E manual available for free PDF download: User Manual

HEIDENHAIN TNC 640 E User Manual

HEIDENHAIN TNC 640 E User Manual (743 pages)

Brand: HEIDENHAIN | Category: Control Unit | Size: 11 MB

Table of Contents

Fundamentals | New Cycle Functions of Software 34059X
3
Fundamentals | New and Changed Cycle Functions of Software 34059X
4
New and Changed Cycle Functions of Software 34059X
11
The Character Set of the Fixed Cycle 225 Engraving was
12
The Character Set of the Fixed Cycle 225 Engraving was
13
Table of Contents
19
Fundamentals / Overviews
53
Using Fixed Cycles
57
Fixed Cycles: Drilling
77
- Fundamentals
  78
- Overview
  78
- CENTERING (Cycle 240, DIN/ISO: G240)
  79
- Cycle Run
  79
- Please Note While Programming
  79
- Cycle Parameters
  80
- DRILLING (Cycle 200)
  81
- Cycle Run
  81
- Please Note While Programming
  81
- Cycle Parameters
  82
- REAMING (Cycle 201, DIN/ISO: G201)
  83
- Cycle Run
  83
- Please Note While Programming
  83
- Cycle Parameters
  84
- BORING (Cycle 202, DIN/ISO: G202)
  85
- Cycle Run
  85
- Please Note While Programming
  86
- Cycle Parameters
  87
- UNIVERSAL DRILLING (Cycle 203, DIN/ISO: G203)
  88
- Cycle Run
  88
- Please Note While Programming
  91
- Cycle Parameters
  92
- BACK BORING (Cycle 204, DIN/ISO: G204)
  94
- Cycle Run
  94
- Please Note While Programming
  95
- Cycle Parameters
  96
- UNIVERSAL PECKING (Cycle 205, DIN/ISO: G205)
  98
- Cycle Run
  98
- Please Note While Programming
  99
- Cycle Parameters
  100
- Position Behavior When Working with Q379
  102
- BORE MILLING (Cycle 208)
  106
- Cycle Run
  106
- Please Note While Programming
  107
- Cycle Parameters
  108
- SINGLE-LIP DEEP-HOLE DRILLING (Cycle 241, DIN/ISO: G241)
  109
- Cycle Run
  109
- Please Note While Programming
  110
- Cycle Parameters
  111
- Position Behavior When Working with Q379
  113
- 3.11 Programming Examples
  117
- Example: Drilling Cycles
  117
- Example: Using Drilling Cycles in Connection with PATTERN DEF
  118
Fixed Cycles: Tapping / Thread Milling
121
- Fundamentals
  122
- Overview
  122
- TAPPING with a Floating Tap Holder (Cycle 206, DIN/ISO: G206)
  123
- Cycle Run
  123
- Please Note While Programming
  124
- Cycle Parameters
  125
- RIGID TAPPING Without a Floating Tap Holder (Cycle 207, DIN/ISO: G207)
  126
- Cycle Run
  126
- Please Note While Programming
  127
- Cycle Parameters
  128
- Retracting after a Program Interruption
  129
- TAPPING with CHIP BREAKING (Cycle 209, DIN/ISO: G209)
  130
- Cycle Run
  130
- Please Note While Programming
  131
- Cycle Parameters
  132
- Fundamentals of Thread Milling
  134
- Prerequisites
  134
- THREAD MILLING (Cycle 262, DIN/ISO: G262)
  136
- Cycle Run
  136
- Please Note While Programming
  137
- Cycle Parameters
  138
- THREAD MILLING/COUNTERSINKING (Cycle 263, DIN/ISO: G263)
  139
- Cycle Run
  139
- Please Note While Programming
  140
- Cycle Parameters
  141
- THREAD DRILLING/MILLING (Cycle 264, DIN/ISO: G264)
  143
- Cycle Run
  143
- Please Note While Programming
  144
- Cycle Parameters
  145
- HELICAL THREAD DRILLING/MILLING (Cycle 265, DIN/ISO: G265)
  147
- Cycle Run
  147
- Please Note While Programming
  148
- Cycle Parameters
  149
- OUTSIDE THREAD MILLING (Cycle 267, DIN/ISO: G267)
  151
- Cycle Run
  151
- Please Note While Programming
  152
- Cycle Parameters
  153
- 4.11 Programming Examples
  155
- Example: Thread Milling
  155
Fixed Cycles: Pocket Milling / Stud Milling / Slot Milling
157
- Fundamentals
  158
- Overview
  158
- RECTANGULAR POCKET (Cycle 251, DIN/ISO: G251)
  159
- Cycle Run
  159
- Please Note While Programming
  160
- Cycle Parameters
  162
- CIRCULAR POCKET (Cycle 252, DIN/ISO: G252)
  164
- Cycle Run
  164
- Please Note While Programming
  166
- Cycle Parameters
  168
- SLOT MILLING (Cycle 253, DIN/ISO: G253)
  170
- Cycle Run
  170
- Please Note While Programming
  171
- Cycle Parameters
  172
- CIRCULAR SLOT (Cycle 254, DIN/ISO: G254)
  174
- Cycle Run
  174
- Please Note While Programming
  175
- Cycle Parameters
  177
- RECTANGULAR STUD (Cycle 256, DIN/ISO: G256)
  180
- Cycle Run
  180
- Please Note While Programming
  181
- Cycle Parameters
  182
- CIRCULAR STUD (Cycle 257, DIN/ISO: G257)
  185
- Cycle Run
  185
- Please Note While Programming
  186
- Cycle Parameters
  187
- POLYGON STUD (Cycle 258, DIN/ISO: G258)
  189
- Cycle Run
  189
- Please Note While Programming
  190
- Cycle Parameters
  192
- FACE MILLING (Cycle 233, DIN/ISO: G233)
  194
- Cycle Run
  194
- Please Note While Programming
  198
- Cycle Parameters
  199
- Programming Examples
  202
- Example: Milling Pockets, Studs and Slots
  202
Fixed Cycles: Pattern Definitions
205
- Fundamentals
  206
- Overview
  206
- POLAR PATTERN (Cycle 220, DIN/ISO: G220)
  207
- Cycle Run
  207
- Please Note While Programming
  207
- Cycle Parameters
  208
- LINEAR PATTERN (Cycle 221, DIN/ISO: G221)
  210
- Cycle Run
  210
- Please Note While Programming
  210
- Cycle Parameters
  211
- Programming Examples
  212
- Example: Polar Hole Patterns
  212
Fixed Cycles: Contour Pocket
215
- SL Cycles
  216
- Fundamentals
  216
- Overview
  218
- CONTOUR (Cycle 14, DIN/ISO: G37)
  219
- Please Note While Programming
  219
- Cycle Parameters
  219
- Superimposed Contours
  220
- Fundamentals
  220
- Subprograms: Overlapping Pockets
  220
- Area of Inclusion
  221
- Area of Exclusion
  222
- Area of Intersection
  223
- CONTOUR DATA (Cycle 20, DIN/ISO: G120)
  224
- Please Note While Programming
  224
- Cycle Parameters
  225
- PILOT DRILLING (Cycle 21, DIN/ISO: G121)
  226
- Cycle Run
  226
- Please Note While Programming
  227
- Cycle Parameters
  227
- ROUGHING (Cycle 22, DIN/ISO: G122)
  228
- Cycle Run
  228
- Please Note While Programming
  229
- Cycle Parameters
  230
- FLOOR FINISHING (Cycle 23, DIN/ISO: G123)
  232
- Cycle Run
  232
- Please Note While Programming
  233
- Cycle Parameters
  233
- SIDE FINISHING (Cycle 24, DIN/ISO: G124)
  234
- Cycle Run
  234
- Please Note While Programming
  235
- Cycle Parameters
  236
- CONTOUR TRAIN (Cycle 25, DIN/ISO: G125)
  237
- Cycle Run
  237
- Please Note While Programming
  238
- Cycle Parameters
  239
- THREE-D CONT. TRAIN (Cycle 276, DIN/ISO: G276)
  241
- Cycle Run
  241
- Please Note While Programming
  242
- Cycle Parameters
  244
- CONTOUR TRAIN DATA (Cycle 270, DIN/ISO: G270)
  246
- Please Note While Programming
  246
- Cycle Parameters
  246
- TROCHOIDAL SLOT (Cycle 275, DIN/ISO: G275)
  247
- Cycle Run
  247
- Please Note While Programming
  249
- Cycle Parameters
  250
- Programming Examples
  252
- Example: Roughing-Out and Fine-Roughing a Pocket
  252
- Example: Pilot Drilling, Roughing-Out and Finishing Overlapping Contours
  254
- Example: Contour Train
  256
Fixed Cycles: Cylindrical Surface
257
- Fundamentals
  258
- Overview of Cylindrical Surface Cycles
  258
- CYLINDER SURFACE (Cycle 27, DIN/ISO: G127, Software Option 1)
  259
- Cycle Run
  259
- Please Note While Programming
  260
- Cycle Parameters
  261
- CYLINDER SURFACE Slot Milling (Cycle 28, DIN/ISO: G128, Software Option 1)
  262
- Cycle Run
  262
- Please Note While Programming
  263
- Cycle Parameters
  265
- CYLINDER SURFACE Ridge Milling (Cycle 29, DIN/ISO: G129, Software Option 1)
  266
- Cycle Run
  266
- Please Note While Programming
  267
- Cycle Parameters
  268
- CYLINDER SURFACE (Cycle 39, DIN/ISO: G139, Software Option 1)
  269
- Cycle Run
  269
- Please Note While Programming
  270
- Cycle Parameters
  271
- Programming Examples
  272
- Example: Cylinder Surface with Cycle 27
  272
- Example: Cylinder Surface with Cycle 28
  274
Fixed Cycles: Contour Pocket with Contour Formula
275
Cycles: Coordinate Transformations
289
- Fundamentals
  290
- Overview
  290
- Effectiveness of Coordinate Transformations
  290
- DATUM SHIFT (Cycle 7, DIN/ISO: G54)
  291
- Effect
  291
- Cycle Parameters
  291
- Please Note While Programming
  291
- DATUM SHIFT with Datum Tables (Cycle 7, DIN/ISO: G53)
  292
- Effect
  292
- Please Note While Programming
  293
- Cycle Parameters
  293
- Selecting a Datum Table in the Part Program
  294
- Editing the Datum Table in the Programming Mode of Operation
  294
- Configuring a Datum Table
  296
- Leaving a Datum Table
  296
- Status Displays
  296
- PRESETTING (Cycle 247, DIN/ISO: G247)
  297
- Effect
  297
- Please Note before Programming
  297
- Cycle Parameters
  297
- Status Displays
  297
- MIRRORING (Cycle 8, DIN/ISO: G28)
  298
- Effect
  298
- Please Note While Programming
  299
- Cycle Parameters
  299
- ROTATION (Cycle 10, DIN/ISO: G73)
  300
- Effect
  300
- Please Note While Programming
  301
- Cycle Parameters
  301
- Scaling
  302
- Effect
  302
- Cycle Parameters
  302
- AXIS-SPECIFIC SCALING (Cycle 26)
  303
- Effect
  303
- Please Note While Programming
  303
- Cycle Parameters
  304
- WORKING PLANE (Cycle 19, DIN/ISO: G80, Software Option 1)
  305
- Effect
  305
- Please Note While Programming
  306
- Cycle Parameters
  307
- Resetting
  307
- Positioning the Axes of Rotation
  308
- Position Display in a Tilted System
  309
- Monitoring of the Working Space
  309
- Positioning in a Tilted Coordinate System
  310
- Combining Coordinate Transformation Cycles
  310
- Procedure for Working with Cycle 19 WORKING PLANE
  311
- Programming Examples
  312
- Example: Coordinate Transformation Cycles
  312
Cycles: Special Functions
315
- Fundamentals
  316
- Overview
  316
- DWELL TIME (Cycle 9, DIN/ISO: G04)
  317
- Function
  317
- Cycle Parameters
  317
- PROGRAM CALL (Cycle 12, DIN/ISO: G39)
  318
- Cycle Function
  318
- Please Note While Programming
  318
- Cycle Parameters
  318
- SPINDLE ORIENTATION (Cycle 13, DIN/ISO: G36)
  319
- Cycle Function
  319
- Please Note While Programming
  319
- Cycle Parameters
  319
- TOLERANCE (Cycle 32, DIN/ISO: G62)
  320
- Cycle Function
  320
- Influences of the Geometry Definition in the CAM System
  320
- Please Note While Programming
  321
- Cycle Parameters
  322
- INTERPOLATION TURNING, CONTOUR FINISHING (Cycle 292, DIN/ISO: G292, Software Option 96)
  323
- Cycle Run
  323
- Please Note While Programming
  325
- Cycle Parameters
  327
- Machining Variants
  328
- Defining the Tool
  330
- COUPLING INTERPOLATION TURNING (Cycle 291, DIN/ISO: G291, Software Option 96)
  333
- Cycle Run
  333
- Please Note While Programming
  333
- Cycle Parameters
  335
- Defining the Tool
  336
- ENGRAVING (Cycle 225, DIN/ISO: G225)
  340
- Cycle Run
  340
- Please Note While Programming
  340
- Cycle Parameters
  341
- Allowed Engraving Characters
  343
- Characters that Cannot be Printed
  343
- Engraving System Variables
  344
- Engraving the Counter Reading
  345
- FACE MILLING (Cycle 232, DIN/ISO: G232)
  346
- Cycle Run
  346
- Please Note While Programming
  348
- Cycle Parameters
  349
- ASCERTAIN the LOAD (Cycle 239, DIN/ISO: G239, Software Option 143)
  351
- Cycle Run
  351
- Please Note While Programming
  352
- Cycle Parameters
  352
- Programming Examples
  353
- Example: Interpolation Turning Cycle 291
  353
- Example: Interpolation Turning Cycle 292
  355
- THREAD CUTTING (Cycle 18, DIN/ISO: G18)
  357
- Cycle Run
  357
- Please Note While Programming
  357
- Cycle Parameters
  358
Cycles: Turning
359
- Turning Cycles (Software Option 50)
  360
- Overview
  360
- Working with Turning Cycles
  363
- Blank Form Update (FUNCTION TURNDATA)
  364
- ADAPT ROTARY COORDINATE SYSTEM (Cycle 800, DIN/ISO: G800)
  366
- Application
  366
- Effect
  369
- Please Note While Programming
  369
- Cycle Parameters
  370
- RESET ROTARY COORDINATE SYSTEM (Cycle 801, DIN/ISO: G801)
  372
- Please Note While Programming
  372
- Effect
  373
- Cycle Parameters
  373
- 12.4 Fundamentals of Turning Cycles
  374
- TURN SHOULDER LONGITUDINAL (Cycle 811, DIN/ISO: G811)
  375
- Application
  375
- Roughing Cycle Run
  375
- Finishing Cycle Run
  376
- Please Note While Programming
  376
- Cycle Parameters
  377
- TURN SHOULDER LONGITUDINAL EXTENDED (Cycle 812, DIN/ISO: G812)
  378
- Application
  378
- Roughing Cycle Run
  378
- Finishing Cycle Run
  379
- Please Note While Programming
  379
- Cycle Parameters
  380
- TURN, LONGITUDINAL PLUNGE (Cycle 813, DIN/ISO: G813)
  382
- Application
  382
- Roughing Cycle Run
  382
- Finishing Cycle Run
  383
- Please Note While Programming
  383
- Cycle Parameters
  384
- TURN, LONGITUDINAL PLUNGE EXTENDED (Cycle 814, DIN/ISO: G814)
  385
- Application
  385
- Roughing Cycle Run
  385
- Finishing Cycle Run
  386
- Please Note While Programming
  386
- Cycle Parameters
  387
- TURN CONTOUR LONGITUDINAL (Cycle 810, DIN/ISO: G810)
  389
- Application
  389
- Roughing Cycle Run
  389
- Finishing Cycle Run
  390
- Please Note While Programming
  390
- Cycle Parameters
  391
- TURN CONTOUR-PARALLEL (Cycle 815, DIN/ISO: G815)
  393
- Application
  393
- Roughing Cycle Run
  393
- Finishing Cycle Run
  394
- Please Note While Programming
  394
- Cycle Parameters
  395
- TURN SHOULDER FACE (Cycle 821, DIN/ISO: G821)
  397
- Application
  397
- Roughing Cycle Run
  397
- Finishing Cycle Run
  398
- Please Note While Programming
  398
- Cycle Parameters
  399
- TURN SHOULDER FACE EXTENDED (Cycle 822, DIN/ISO: G822)
  400
- Application
  400
- Roughing Cycle Run
  400
- Finishing Cycle Run
  401
- Please Note While Programming
  401
- Cycle Parameters
  402
- TURN, TRANSVERSE PLUNGE (Cycle 823, DIN/ISO: G823)
  404
- Application
  404
- Roughing Cycle Run
  404
- Finishing Cycle Run
  405
- Please Note While Programming
  405
- Cycle Parameters
  406
- TURN, TRANSVERSE PLUNGE EXTENDED (Cycle 824, DIN/ISO: G824)
  407
- Application
  407
- Roughing Cycle Run
  407
- Finishing Cycle Run
  408
- Please Note While Programming
  408
- Cycle Parameters
  409
- TURN CONTOUR FACE (Cycle 820, DIN/ISO: G820)
  411
- Application
  411
- Roughing Cycle Run
  411
- Finishing Cycle Run
  412
- Please Note While Programming
  412
- Cycle Parameters
  413
- SIMPLE RADIAL RECESSING (Cycle 841, DIN/ISO: G841)
  415
- Application
  415
- Roughing Cycle Run
  415
- Finishing Cycle Run
  416
- Please Note While Programming
  416
- Cycle Parameters
  417
- RADIAL RECESSING EXTENDED (Cycle 842, DIN/ISO: G842)
  418
- Application
  418
- Roughing Cycle Run
  418
- Finishing Cycle Run
  419
- Please Note While Programming
  419
- Cycle Parameters
  420
- RECESSING CONTOUR RADIAL (Cycle 840, DIN/ISO: G840)
  422
- Application
  422
- Roughing Cycle Run
  422
- Finishing Cycle Run
  423
- Please Note While Programming
  423
- Cycle Parameters
  424
- SIMPLE AXIAL RECESSING (Cycle 851, DIN/ISO: G851)
  426
- Application
  426
- Roughing Cycle Run
  426
- Finishing Cycle Run
  427
- Please Note While Programming
  427
- Cycle Parameters
  428
- AXIAL RECESSING EXTENDED (Cycle 852, DIN/ISO: G852)
  429
- Application
  429
- Roughing Cycle Run
  429
- Finishing Cycle Run
  430
- Please Note While Programming
  430
- Cycle Parameters
  431
- AXIAL RECESSING (Cycle 850, DIN/ISO: G850)
  433
- Application
  433
- Roughing Cycle Run
  433
- Finishing Cycle Run
  434
- Please Note While Programming
  434
- Cycle Parameters
  435
- RADIAL RECESSING (Cycle 861, DIN/ISO: G861)
  437
- Application
  437
- Roughing Cycle Run
  437
- Finishing Cycle Run
  438
- Please Note While Programming
  438
- Cycle Parameters
  439
- RADIAL RECESSING EXTENDED (Cycle 862, DIN/ISO: G862)
  441
- Application
  441
- Roughing Cycle Run
  441
- Finishing Cycle Run
  442
- Please Note While Programming
  442
- Cycle Parameters
  443
- RECESSING CONTOUR RADIAL (Cycle 860, DIN/ISO: G860)
  445
- Application
  445
- Roughing Cycle Run
  445
- Finishing Cycle Run
  446
- Please Note While Programming
  447
- Cycle Parameters
  448
- AXIAL RECESSING (Cycle 871, DIN/ISO: G871)
  450
- Application
  450
- Roughing Cycle Run
  450
- Finishing Cycle Run
  451
- Please Note While Programming
  451
- Cycle Parameters
  452
- AXIAL RECESSING EXTENDED (Cycle 872, DIN/ISO: G872)
  454
- Application
  454
- Roughing Cycle Run
  454
- Finishing Cycle Run
  455
- Please Note While Programming
  455
- Cycle Parameters
  456
- AXIAL RECESSING (Cycle 870, DIN/ISO: G870)
  458
- Application
  458
- Roughing Cycle Run
  458
- Finishing Cycle Run
  459
- Please Note While Programming
  460
- Cycle Parameters
  461
- THREAD LONGITUDINAL (Cycle 831, DIN/ISO: G831)
  463
- Application
  463
- Cycle Run
  463
- Please Note While Programming
  464
- Cycle Parameters
  466
- THREAD EXTENDED (Cycle 832, DIN/ISO: G832)
  467
- Application
  467
- Cycle Run
  467
- Please Note While Programming
  468
- Cycle Parameters
  469
- CONTOUR-PARALLEL THREAD (Cycle 830, DIN/ISO: G830)
  471
- Application
  471
- Cycle Run
  471
- Please Note While Programming
  472
- Cycle Parameters
  474
- GEAR HOBBING (Cycle 880, DIN/ISO: G880)
  476
- Cycle Run
  476
- Please Note While Programming
  477
- Cycle Parameters
  479
- Direction of Rotation Depending on the Machining Side (Q550)
  482
- CHECK UNBALANCE (Cycle 892, DIN/ISO: G892)
  483
- Application
  483
- Please Note While Programming
  484
- Cycle Parameters
  486
- 12.33 Example Program
  487
- Example: Shoulder with Recess
  487
- Example: Gear Hobbing
  489
Using Touch Probe Cycles
491
Touch Probe Cycles: Automatic Measurement of Workpiece Misalignment
501
- 14.1 Fundamentals
  502
- Overview
  502
- Characteristics Common to All Touch Probe Cycles for Measuring Workpiece Misalignment
  504
- BASIC ROTATION (Cycle 400, DIN/ISO: G400)
  505
- Cycle Run
  505
- Please Note While Programming
  505
- Cycle Parameters
  506
- BASIC ROTATION over Two Holes (Cycle 401, DIN/ISO: G401)
  508
- Cycle Run
  508
- Please Note While Programming
  509
- Cycle Parameters
  510
- BASIC ROTATION over Two Studs (Cycle 402, DIN/ISO: G402)
  512
- Cycle Run
  512
- Please Note While Programming
  513
- Cycle Parameters
  514
- BASIC ROTATION Compensation Via Rotary Axis (Cycle 403, DIN/ISO: G403)
  516
- Cycle Run
  516
- Please Note While Programming
  517
- Cycle Parameters
  518
- SET BASIC ROTATION (Cycle 404, DIN/ISO: G404)
  520
- Cycle Run
  520
- Cycle Parameters
  520
- Compensating Workpiece Misalignment by Rotating the C Axis (Cycle 405, DIN/ISO: G405)
  521
- Cycle Run
  521
- Please Note While Programming
  522
- Cycle Parameters
  523
- Example: Determining a Basic Rotation from Two Holes
  524
Touch Probe Cycles: Automatic Presetting
525
- 15.1 Fundamentals
  526
- Overview
  526
- Characteristics Common to All Touch Probe Cycles for Presetting
  528
- SLOT CENTER PRESET (Cycle 408, DIN/ISO: G408)
  530
- Cycle Run
  530
- Please Note While Programming
  531
- Cycle Parameters
  532
- RIDGE CENTER PRESET (Cycle 409, DIN/ISO: G409)
  534
- Cycle Run
  534
- Please Note While Programming
  535
- Cycle Parameters
  536
- PRESET from INSIDE of RECTANGLE (Cycle 410, DIN/ISO: G410)
  538
- Cycle Run
  538
- Please Note While Programming
  539
- Cycle Parameters
  540
- PRESET from OUTSIDE of RECTANGLE (Cycle 411, DIN/ISO: G411)
  542
- Cycle Run
  542
- Please Note While Programming
  543
- Cycle Parameters
  544
- PRESET from INSIDE of CIRCLE (Cycle 412, DIN/ISO: G412)
  546
- Cycle Run
  546
- Please Note While Programming
  547
- Cycle Parameters
  548
- PRESET from OUTSIDE of CIRCLE (Cycle 413, DIN/ISO: G413)
  551
- Cycle Run
  551
- Please Note While Programming
  552
- Cycle Parameters
  553
- PRESET from OUTSIDE of CORNER (Cycle 414, DIN/ISO: G414)
  556
- Cycle Run
  556
- Please Note While Programming
  557
- Cycle Parameters
  558
- PRESET from INSIDE of CORNER (Cycle 415, DIN/ISO: G415)
  561
- Cycle Run
  561
- Please Note While Programming
  562
- Cycle Parameters
  563
- PRESET CIRCLE CENTER (Cycle 416, DIN/ISO: G416)
  566
- Cycle Run
  566
- Please Note While Programming
  567
- Cycle Parameters
  568
- PRESET in TOUCH PROBE AXIS (Cycle 417, DIN/ISO: G417)
  570
- Cycle Run
  570
- Please Note While Programming
  570
- Cycle Parameters
  571
- PRESET at CENTER of 4 HOLES (Cycle 418, DIN/ISO: G418)
  572
- Cycle Run
  572
- Please Note While Programming
  573
- Cycle Parameters
  574
- PRESET in ONE AXIS (Cycle 419, DIN/ISO: G419)
  576
- Cycle Run
  576
- Please Note While Programming
  576
- Cycle Parameters
  577
- Example: Presetting in Center of a Circular Segment and on Top Surface of Workpiece
  579
- Example: Presetting on Top Surface of Workpiece and in Center of a Bolt Hole Circle
  580
Touch Probe Cycles: Automatic Workpiece Inspection
583
- 16.1 Fundamentals
  584
- Overview
  584
- Recording the Results of Measurement
  585
- Measurement Results in Q Parameters
  587
- Classification of Results
  587
- Tolerance Monitoring
  587
- Tool Monitoring
  588
- Reference System for Measurement Results
  589
- REFERENCE PLANE (Cycle 0, DIN/ISO: G55)
  590
- Cycle Run
  590
- Please Note While Programming
  590
- Cycle Parameters
  590
- POLAR PRESET (Cycle 1)
  591
- Cycle Run
  591
- Please Note While Programming
  591
- Cycle Parameters
  591
- MEASURE ANGLE (Cycle 420, DIN/ISO: G420)
  592
- Cycle Run
  592
- Please Note While Programming
  592
- Cycle Parameters
  593
- MEASURE HOLE (Cycle 421, DIN/ISO: G421)
  595
- Cycle Run
  595
- Please Note While Programming
  596
- Cycle Parameters
  597
- MEASURE HOLE OUTSIDE (Cycle 422, DIN/ISO: G422)
  600
- Cycle Run
  600
- Please Note While Programming
  601
- Cycle Parameters
  602
- MEASURE RECTANGLE INSIDE (Cycle 423, DIN/ISO: G423)
  605
- Cycle Run
  605
- Please Note While Programming
  605
- Cycle Parameters
  606
- MEASURE RECTANGLE OUTSIDE (Cycle 424, DIN/ISO: G424)
  608
- Cycle Run
  608
- Please Note While Programming
  608
- Cycle Parameters
  609
- MEASURE INSIDE WIDTH (Cycle 425, DIN/ISO: G425)
  611
- Cycle Run
  611
- Please Note While Programming
  611
- Cycle Parameters
  612
- MEASURE RIDGE WIDTH (Cycle 426, DIN/ISO: G426)
  614
- Cycle Run
  614
- Please Note While Programming
  614
- Cycle Parameters
  615
- MEASURE COORDINATE (Cycle 427, DIN/ISO: G427)
  617
- Cycle Run
  617
- Please Note While Programming
  617
- Cycle Parameters
  618
- MEASURE BOLT HOLE CIRCLE (Cycle 430, DIN/ISO: G430)
  620
- Cycle Run
  620
- Please Note While Programming
  621
- Cycle Parameters
  621
- MEASURE PLANE (Cycle 431, DIN/ISO: G431)
  623
- Cycle Run
  623
- Please Note While Programming
  624
- Cycle Parameters
  624
- 16.14 Programming Examples
  626
- Example: Measuring and Reworking a Rectangular Stud
  626
- Example: Measuring a Rectangular Pocket and Recording the Results
  628
Touch Probe Cycles: Special Functions
629
- Fundamentals
  630
- Overview
  630
- MEASURE (Cycle 3)
  631
- Cycle Run
  631
- Please Note While Programming
  631
- Cycle Parameters
  632
- MEASURING in 3-D (Cycle 4)
  633
- Cycle Run
  633
- Please Note While Programming
  633
- Cycle Parameters
  634
- PROBING (Cycle 444)
  635
- Cycle Run
  635
- Cycle Parameters
  637
- Please Note While Programming
  639
- Calibrating a Touch Trigger Probe
  640
- Displaying Calibration Values
  641
- CALIBRATE TS (Cycle 460, DIN/ISO: G460)
  642
- CALIBRATE TS LENGTH (Cycle 461, DIN/ISO: G461)
  646
- CALIBRATE TS RADIUS INSIDE (Cycle 462, DIN/ISO: G462)
  648
- CALIBRATE TS RADIUS OUTSIDE (Cycle 463, DIN/ISO: G463)
  650
- FAST PROBING (Cycle 441, DIN/ISO G441)
  652
- Cycle Run
  652
- Please Note While Programming
  652
- Cycle Parameters
  653
Visual Setup Control VSC (Software Option 136)
655
- Camera-Based Monitoring of the Setup Situation VSC (Option 136)
  656
- Fundamentals
  656
- Produce Live Image
  658
- Manage Monitoring Data
  658
- Overview
  661
- Results of the Image Evaluation
  662
- Configuration
  663
- Defining the Monitoring Area
  665
- Possible Queries
  666
- Workspace Global (Cycle 600)
  667
- Application
  667
- Creating Reference Images
  667
- Monitoring Phase
  670
- Please Note While Programming
  671
- Cycle Parameters
  672
- Workspace Local (Cycle 601)
  673
- Application
  673
- Creating Reference Images
  673
- Monitoring Phase
  676
- Please Note While Programming
  677
- Cycle Parameters
  678
Touch Probe Cycles: Automatic Kinematics Measurement
679
- Kinematics Measurement with TS Touch Probes (Kinematicsopt Option)
  680
- Fundamentals
  680
- Overview
  680
- 19.2 Prerequisites
  681
- Please Note While Programming
  682
- SAVE KINEMATICS (Cycle 450, DIN/ISO: G450, Option)
  683
- Cycle Run
  683
- Please Note While Programming
  683
- Cycle Parameters
  684
- Logging Function
  684
- Notes on Data Management
  685
- MEASURE KINEMATICS (Cycle 451, DIN/ISO: G451, Option)
  686
- Cycle Run
  686
- Positioning Direction
  688
- Machines with Hirth-Coupled Axes
  689
- Choice of Number of Measuring Points
  690
- Choice of the Calibration Sphere Position on the Machine Table
  691
- Notes on the Accuracy
  691
- Notes on Various Calibration Methods
  692
- Backlash
  693
- Please Note While Programming
  694
- Cycle Parameters
  695
- Various Modes (Q406)
  698
- Logging Function
  699
- PRESET COMPENSATION (Cycle 452, DIN/ISO: G452, Option)
  700
- Cycle Run
  700
- Please Note While Programming
  702
- Cycle Parameters
  703
- Adjustment of Interchangeable Heads
  705
- Drift Compensation
  707
- Logging Function
  709
- KINEMATICS GRID (Cycle 453, DIN/ISO: G453, Option)
  710
- Cycle Run
  710
- Various Modes (Q406)
  712
- Choice of the Calibration Sphere Position on the Machine Table
  712
- Please Note While Programming
  713
- Cycle Parameters
  714
- Logging Function
  716
Touch Probe Cycles: Automatic Tool Measurement
717
- Fundamentals
  718
- Overview
  718
- Differences between Cycles 31 to 33 and Cycles 481 to 483
  719
- Setting Machine Parameters
  720
- Entries in the Tool Table TOOL.T
  722
- Calibrating the TT (Cycle 30 or 480, DIN/ISO: G480 Option 17)
  724
- Cycle Run
  724
- Please Note While Programming
  725
- Cycle Parameters
  725
- Calibrating the Wireless TT 449 (Cycle 484, DIN/ISO: G484)
  726
- Fundamentals
  726
- Cycle Run
  726
- Please Note While Programming
  727
- Cycle Parameters
  727
- Measuring Tool Length (Cycle 31 or 481, DIN/ISO: G481)
  728
- Cycle Run
  728
- Please Note While Programming
  729
- Cycle Parameters
  729
- Measuring Tool Radius (Cycle 32 or 482, DIN/ISO: G482)
  730
- Cycle Run
  730
- Please Note While Programming
  730
- Cycle Parameters
  731
- Measuring Tool Length and Radius (Cycle 33 or 483, DIN/ISO: G483)
  732
- Cycle Run
  732
- Please Note While Programming
  732
- Cycle Parameters
  733
Tables of Cycles
735
- Overview
  736
- Fixed Cycles
  736
- Turning Cycles
  738
- Touch Probe Cycles
  739

Advertisement

Advertisement

Related Products

HEIDENHAIN Categories

Media Converter Measuring Instruments Industrial Equipment Control Systems Control Unit

More HEIDENHAIN Manuals