User Guidelines
This command has no user guidelines.
Example
The following examples display the configuration of views with and without a
view name specified.
console# show snmp views
Name
OID Tree
-----------
-----------------------
user-view1
1.3.6.1.2.1.1
user-view1
1.3.6.1.2.1.1.7
user-view2
1.3.6.1.2.1.2.2.1.*.1
show trapflags
Use the show trapflags command to display the trap settings.
Syntax
show trapflags [vrf {vrf-name}][ospf|ospfv3|captive-portal]
•
vrf-name—The name of an existing VRF instance.
ospf—Display OSPFv2 specific trap settings.
•
•
ospfv3—Display OSPFv3 specific trap settings.
captive-portal—Display captive-portal specific trap settings.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
Type
---------
Included
Excluded
Included
Switch Management Commands
2097