Show Vlan - Cisco Catalyst 4500 Series Configuration Manual

Chapter 2

show vlan

To display VLAN information, use the show vlan command.
Syntax Description
brief
id vlan_id
name name
private-vlan
type
Command Default This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(8a)EW
12.1(12c)EW
Examples
The following example shows how to display the VLAN parameters for all VLANs within the
administrative domain:
Switch# show vlan
VLAN Name
---- -------------------------------- --------- -------------------------------
1
2
3
4
5
6
10
20
<...Output truncated...>
show vlan [brief | id vlan_id | name name]
show vlan private-vlan [type]
(Optional) Displays only a single line for each VLAN, naming the VLAN, status, and
ports.
(Optional) Displays information about a single VLAN identified by VLAN ID
number; valid values are from 1 to 4094.
(Optional) Displays information about a single VLAN identified by VLAN name;
valid values are an ASCII string from 1 to 32 characters.
Displays private VLAN information.
(Optional) Private VLAN type.
Modification
This command was introduced on the Catalyst 4500 series switch.
Added support for extended VLAN addresses.
default
VLAN0002
VLAN0003
VLAN0004
VLAN0005
VLAN0006
VLAN0010
VLAN0020
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Status Ports
active Fa5/9
active Fa5/9
active Fa5/9
active Fa5/9
active Fa5/9
active Fa5/9
active Fa5/9
active Fa5/9
show vlan
2-991