Ac Power Supply Troubleshooting - Xerox Phaser 6130 Service Manual

General Troubleshooting

AC Power Supply Troubleshooting

4-40
Troubleshooting Reference Table
Applicable Parts
LVPS, PL9.1.4
Troubleshooting Procedure Table
Step Actions and Questions
Check the voltage at the AC wall outlet. Is
1
there approximately 110 VAC (or 220 VAC if
the printer is a 220 V configuration) at the
AC wall outlet?
Check the power cord for defects or a loose
2
connection. Is the power cord loose or
defective?
Wiring and Plug/Jack References
"DC Power Supply" on page 10-17
Yes
Go to step 2.
Replace or
reconnect the
power cord.
Phaser 6130 Color Laser Printer Service Manual
No
Notify the
customer of
improper AC
output from
the outlet.
Replace the
LVPS
(page 8-55).