Install The Library; Verify The Site Meets Environmental Requirements; Temperature And Humidity Limits Airborne Contaminants Limits - Oracle SL150 Library Manual

2

Install the Library

The SL150 library installs into a standard 19-inch rack. You must install the Base
Module first, and then install any Expansion Modules below it.
Note:
These installation instructions use the Sun Rack II (a standard Oracle 19-
inch rack). If your rack is different, use the instructions as a basic guide but
alter the steps accordingly.
Library installation involves the following tasks:
•

Verify the Site Meets Environmental Requirements

• Prepare the Rack
• Unpack and Acclimate the Library
• Install the Base Module
• Install the Expansion Module
• Install Power Supplies and Tape Drives
• Cable the Library
• Unlock the Robot
• Apply Power to the Library
• Configure the Library After Powering-on for the First Time
• Run a Self-Test
Verify the Site Meets Environmental Requirements
Make sure the site meets environmental requirements to prevent equipment damage.
• Temperature and Humidity Limits
• Airborne Contaminants Limits
• Positive Pressurization and Ventilation - Hot Aisle Containment System (HACS)
• Electrostatic Discharge
Temperature and Humidity Limits
To increase reliability and prevent equipment damage, maintain the environment
between the recommended temperature and humidity ranges.
Temperature:
2-1