Performing Initial Configuration (Bui) - Oracle ZFS Installation Manual

https://hostname.us.oracle.com:215/
If your network administrator has not yet assigned the network name you chose
for the appliance, you can also configure your appliance using the link:
https://192.168.1.10:215/
If you are unable to connect to the appliance through your web browser, you
can begin text-mode configuration by logging in as "root" and entering the
administrator password you specified on the previous screen.
For help, see https://docs.oracle.com/en/storage/
hostname console login:
Next Steps
To perform initial configuration through the BUI using any client on the same network, see
■
"Performing Initial Configuration (BUI)" on page
you select this method for initial configuration of clustered controllers.
To perform initial configuration through the CLI, see
■
(CLI)" on page

Performing Initial Configuration (BUI)

Use this procedure, which is a step-by-step utility, to complete initial configuration of network
interfaces, the Domain Name Service (DNS), time settings, name services, directory services,
storage, and remote support on the appliance. This procedure is for standalone and clustered
appliance configuration.
Note -
BUI for initial configuration.
For clustered controllers, configure only the primary controller. Do not attempt initial
configuration on both controllers independently. For more information about clustering, see
"Appliance Cluster Configuration" in Oracle ZFS Storage Appliance Administration Guide,
Release
Gather the following information for the interfaces and services you will set up, and
■
Before You Begin
network configuration details.
256.
If you are installing clustered controllers, it is strongly recommended that you use the
OS8.8.x.
Performing Initial Configuration (BUI)
241. It is strongly recommended that
"Performing Initial Configuration
Configuring the Appliance for the First Time 241