Defining Cleaning Cartridge Usage Count Warning Thresholds; Configuring The Barcode Format For Fc-Scsi Hosts; Viewing Cartridge Information - Oracle StorageTek SL3000 User Manual

Modular library system
Hide thumbs Also See for StorageTek SL3000:
Table of Contents

Advertisement

Defining Cleaning Cartridge Usage Count Warning Thresholds

When the unload notification appears, unload the CAP (follow
7.
Cartridges Using a CAP"
Defining Cleaning Cartridge Usage Count Warning Thresholds
The warning threshold should be lower than the cartridge's recommended maximum
usage to allow time to replace the cartridge (see the drive manufacturers'
documentation for recommended usage).
When you import a cleaning cartridge into the library, the library controller sets the
usage count to zero. To display the current usage count, see
Cartridge Status"
In SLC, select Tools > System Detail. Select the Library in the device tree.
1.
Select Auto Clean, and then the Warning Threshold tab.
2.
Select the index number of the cleaning cartridge type to configure.
3.
Enter the new warning threshold for the cartridge type. To disable the warning, set
4.
the threshold to 0.
Click Apply.
5.

Configuring the Barcode Format for FC-SCSI Hosts

The barcode format specifies which part of a cartridge barcode the library passes to
FC-SCSI hosts.
In SLC, select Tools > Configuration.
1.
From the drop-down list, select the presentation format to use for each partition:
2.
Click Apply.
3.

Viewing Cartridge Information

In SLC, select Tools > Reports.
1.
Expand the Status Summary folder in the navigation tree.
2.
Select the Cartridge Table.
3.
See Also
"Viewing Cleaning Cartridge Status"
"Viewing Library and Device Reports with the Reports Utility"
9-4 StorageTek SL3000 User's Guide
on page 8-2 starting with step 2).
on page 9-5.
Note:
The warning threshold for all cleaning cartridges of that type
will be modified.
all — passes all eight barcode characters to the host.
left6 (default) — passes only the six VOLID characters to the host. It does not
pass the domain and type characters, which are the two characters on the right
of the barcode.
"Viewing Cleaning
on page 9-5
"Ejecting
on page 13-1

Advertisement

Table of Contents
loading

Table of Contents