Table of Contents
Advertisement
2. Installation
21.
Attach the decals [A] [B] to the SPDF.
Adjust SP Settings
1.
Turn ON the main power.
2.
Set SP4-688-002 (Scan Image Density Adjustment 1-pass DF) to "101".
3.
Execute SP4-730-002 (FROM Main Factory Setting Execution ON/OFF).
4.
Check the vertical registration for the SPDF.
1. Create an original as shown in the following picture.
The large white arrow indicates the direction of feed.
162
Advertisement
Table of Contents
Troubleshooting
