Table of Contents
Advertisement
4-24
Step 6:
12.
Set Rotation Angle
Setup HMI
NOZZLE
Configure HMI Settings
a. Enter the placement angle which was manually set in Step 7. The options are
0, -90 and +90.
• If rotation is set at 0,
the part will be placed
in the same orientation
as it was picked.
• If rotation is set at -90,
the part will be rotated
90 degrees clockwise
prior to placement.
• If rotation is set at +90,
the part will be rotated
90 degrees counter-
clockwise
prior
placement.
b. Press the right Arrow Key to move to the next Job Wizard screen.
Rotation Options
to
TM-401 User's Guide
-90
0
+90
D292104.7a.fm
Advertisement
Table of Contents
