Quick Start: Vision Setup - V-TEK TM-401 User Manual

5-2

Quick Start: Vision Setup

The following is an outline of the basic steps required to configure inspection on the TM-
401. More detailed instructions follow in the next section of this chapter.
1. Load Vision Software (user supplied computer only)
2. Connect Vision Computer/Monitor to Camera
3. Configure Inspection

Quick Start: Vision Setup

If the optional laptop was purchased for vision configuration V-
TEK, Inc. recommends users create a computer Recovery
Disk prior to operation and conduct periodic back-ups as
needed. Visit the computer manufacturer's website for instruc-
tions on creating a recovery disk.
V-TEK, Inc. does not create or maintain recovery information for
this laptop. Creating a recovery disk is solely the users'
responsibility.
TM-403 User's Guide
D292104.16.fm