Chapter 4: Setup
Power Up the System
Step 1:
Power
Up
1.
Power up the machine by turning the Main Power control on the
lower right side of the cabinet to the ON position.
2.
Press the blue Reset Button on the left side of the machine.
There will be a brief popping sound as the Air Dump Valve
releases air to the machine. As the TM-401 powers up the PLC,
Servo Drivers and HMI Monitor will boot up. On top of the
machine, the Tower Light will flash red indicating the machine is
on but not running.
Note: The boot up process takes approximately 90 seconds.
The monitor will display the HMI Job Tab with a red Home Required message at
the top of the Tab Menu..
D292104.7a.fm
4- 3
Power Up the System