Table of Contents
Advertisement
5-26
Step 2:
A Statistics Graph of all test results will appear in the lower right corner.
Vision
Setup
CONFIGURE
COMPUTER
14.
On the TM-401 HMI, open the Taper Tab. Press the right Arrow button to advance
to the second Taper screen.
Press Trigger to manually trigger an inspection of the part under the camera. The
green
correctly and consistently passes good parts.
Configure Inspection
PASS
message should appear. Test several good parts to ensure TM-401
TM-403 User's Guide
D292104.16.fm
Advertisement
Table of Contents
