Table of Contents
Advertisement
Chapter 5: Setup
Connect Keyence Monitor
Step 1:
Vision
Follow the steps below to connect the Keyence IV-G Camera to the Keyence Monitor.
Setup
(See previous section if using the Keyence computer.)
CONNECT
MONITOR
1.
Connect the Monitor's Ethernet cable to the Ethernet port on the back of the TM-
401 (A).
2.
Connect the Monitor's power cable to the power connection on the back of the TM-
401 (B).
3.
Turn the TM-401 ON. The Keyence Monitor will automatically start and open the
Keyence software program.
4.
Select Direct Connection, then press Connect to establish a connection between
the Keyence Monitor and the Keyence Camera.
D292104.16.fm
A
B
5- 9
Connect Vision
Advertisement
Table of Contents
