V-TEK TM-401 User Manual page 50

3-8
Job Wizard Step 2
In the second Job Wizard screen the user enters the Quantity of parts that will be run and
a brief Description of the job. When the job parameters are set, press the right Arrow
key to move to the next Job Wizard screen.
The third Job Wizard step sets up Taper operation.
Job Wizard Step 3
A. Tape Pitch is determined by the carrier tape
selected. Use the Pitch Setting Guide on the taper to
determine the correct pitch. Press the Tape Pitch
field to open a keypad and type in the desired value.
Job Tab
Arrow Buttons
A
B
TM-401 User's Guide
C
C
D292104.6.fm